Activating Tracking and Logging on the inReach Explorer

The inReach Explorer provides two tracking options:

• Tracking: Tracking is offer on all three inReach models. You can activate a tracking interval of 10 minutes or more and then broadcast your tracking to the explore.delorme.com portal as well as the MapShare feature. Each track send to the Explore portal costs one tracking message.
• Logging: Logging can run separately from tracking or alongside tracking. Logging allows you to track your trip without having to broadcast your tracks over the air and therefore saving tracking fees. Logging also allows you to use intervals below 10 minutes enabling a very accurate account of your trip. 

How-to enable tracking on the inReach Explorer:

1. From the inReach Explorer main menu select "Settings."

2. Scroll to and select the "Tracking" option.

3. Select "Send Interval."

4. Select the desired tracking interval. This is interval that tracking will operate at.

5. Tap the "X" key twice to go back to the main menu. 

6. Select the "Tracking" option.

7. Select "Start Sending."

How-to enable logging on the inReach Explorer:

1. From the inReach Explorer main menu select the "Settings" option.

2. Scroll to and select the "Tracking" option.

3. Select "Log Interval."

4. You will be presented with two options: "While Sending" and "Logging Only." The "While Sending" option allows you to set a logging interval while you are tracking at the same time. It is advised that you select an interval that is different from the tracking interval. The "Logging Only" option allows you to set the logging interval while tracking is not active, the device will passively log your position data in the background.