The GeoPro iHelp Pendant provides users with the ability to perform a check-in, start a check-in session, and stop a check-in session. When a check-in is required, whether it be manually requested by overseeing personnel from the portal or automatically generated based on a check-in interval, the pendant will announce a check is required and continuously provide a reminder until a check-in is performed.
The GeoPro iHelp Pendant is fully compatible with both Monitor Me and Check-In Schedule features of GeoPro. Check-in related features can also be disabled should these feature not be required and you would like to have them removed from the pendant. Please contact Technical Support for further assistance on this.
Follow the instructions below on how to start and stop check-in sessions using the GeoPro iHelp Pendant.
To start a check-in session:
1. Tap the button 3 times. The LED will illuminate green and the pendant will announce, "Check-In Session Started".
2. Your monitoring interval or check-in schedule will then commence.
At the required check-in time, the pendant will receive a reminder and announce, “Please check-in now”, and flash green followed by playing an audible tone repeatedly for 2.5 minutes. It will then announce “Please check-in now” a second time and continue the audible tone for the next 2.5 minutes. Once 5 minutes has elapsed, the device will continue to flash green indicating a check-in is required until one is performed.
To stop a check-in session:
1. Tap the button 4 times. The LED will illuminate green and the pendant will announce, "Check-In Session Ended".
2. Your monitoring interval or check-in schedule will be stopped and reminders will no longer be sent..
Note: After triggering any of the pendant features using the appropriate button taps, please give the device a second to acknowledge the key sequence. This is by design to prevent the pendant from triggering the incorrect feature as you progress through the button taps.