The GeoPro iHelp Pendant does not provide a consistent visual power indicator to display the unit is powered on. This is by design to conserve your pendant's battery power. Instead the a power status check can be performed to determine if the pendant is powered on.
Follow the instructions below for assistance on how to check the power status on your GeoPro iHelp Pendant.
Note: After triggering any of the pendant features using the appropriate button taps, please give the device a second to acknowledge the key sequence. This is by design to prevent the pendant from triggering the incorrect feature as you progress through the button taps.
1. Tap the button once, and the LED will illuminate blue indicating the pendant is powered on.
2. If the LED on the pendant does not illuminate blue, try again.
Note: It's possible the pendant has not been powered on or the battery has drained. If this is the case, please try powering on the unit by pressing and holding the button for 5 seconds or by connecting the pendant to a charger.